The 7M SMC / Fiberglass Panel Adhesive is perfect for bonding sheet metal compound (SMC) and fiberglass reinforced polyester (FRP) body panels. It efficiently bonds SMC and FRP panels to each other and is also effective for bonding metal to metal too.

The 7M 0811 SMC / Fiberglass Panel Adhesive features very good resistance to sag and can be cured at room temperature. It will match the Original Equipment Manufacturer (OEM) finish.

This adhesive comes with a 50 ml Dual-Syringe Cartridge with two mixing tips, Based on an approximate 70°F environment; it takes about 15 minutes to apply and 24 hours to cure.

Key Features of the 7M 0811 SMC / Fiberglass Panel Adhesive:

• Formulated specifically for bonding all types of metals, PVC, Fiberglass, PBT, PPO, ABS, FRT, Polyurethane, Epoxy, Wood, RIM, Nylon, Polyesters, Acrylics, Gelcoats, Styrene, Aluminum, Stainless Steel, Cold Rolled Steel, Stamped Steel etc.
  
• Can be used for bonding metal to metal.
• Very good sag resistance.
• Used for Automotive Components, Marine Assemblies, Appliances, Aerospace Parts, Electrical Components, Plastic & Metal Fabrication
• Provides OEM finish.
• Takes approximately 15 minutes to apply, May remove clamps within 1 hour and 24 hours to cure.
• part number: 7M-0811.
• Comparable to the 3M #08219 Body Panel Bonding SMC FRP to Metal Substrates.
  
• Can withstand paint bake cycles, including powder coating and electron coating, at typically 220 to 230°c for up to 35 minutes.